Altek H864-M Polyester Resin

AOC's Altek H864-M is a medium reactive, resilient, thixotropic, pre-promoted resin.

The Altek H864-M is designed for use in the manufacturing of boats and other composite parts using hand lay-up or spray-up applications methods:

APPLICATION GUIDELINES
Due to the excellent curing characteristics of Altek H864-M SERIES resin, complete all secondary bonding as soon as possible. Exposing the laminate to sunlight will result in severe secondary bonding problems. After 24 hours of cure, it may be necessary to abrade the laminate to insure good secondary bonding, especially if the surface of the laminate is resin rich.

Avoid low fiberglass content and resin puddling with this product.
To assure adequate bonding to gel coats, fabricators should pre-wet the gel coat surface with a thin pass of catalyzed resin prior to lamination. To assure adequate bonding to gel coats, fabricators should pre-wet the gel coat surface with a thin pass of catalyzed resin prior to lamination. Fuel storage tanks should not be produced with the Altek H864-M SERIES resin.

STORAGE STABILITY
Resins are stable for three months from date of production when stored in the original containers away from sunlight at no more than 70°F/21 °C. During the hot summer months, no more than two months stability at 86°F/30°C should be anticipated.